Home > Air Conditioning & Refrigeration Controls > ZONING ACC. & DAMPERS -Source 1 Modulating Round Zoning Dampers >

PART #: RDM10 - DMPR ZONING RND 24V POWER OPN-CLS 10"
PART #: S1-RDM10
S1-RDM10


 
List Price: $257.84
Our Price: $162.17
Sale Price: $115.99
Savings: $141.85
Order Minimums: Please note the order minimum for this site is $50.00. You may be prompted at the end of your order to add additional items to your cart. You may also add an up-charge if you wish. The option for adding an up-charge will be visible when you check out.

Warning: Gas Valves, Circuit Boards (all replacement parts) Should Be Installed By A Licensed Professional. FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE!

Availability: Usually Ships in 2 to 3 Business Days
Product Code: S1-RDM10
Qty:

Description
 

Source 1 Modulating Round Zoning Dampers

The Round Damper, Model S1-RDM, is a 24 Volt AC, power open, power closed damper. The damper is constructed of 22 gauge galvanized steel formed as a rigid spiral pipe and has a circular blade that closes tightly against a neoprene gasket seal.

The S1-RDM can be used for zone control or as the motorized damper for by-pass air when controlled by the Static Pressure Switch, Model S1-SPS. It is designed to also handle high pressure air conditioning systems up to 4”S.P.

The simple 3 wire motor has a Red motor release button that allows the damper blade to be manually rotated without harm to the motor. It also has LED position indicators that illuminate GREEN when Open and Red When Closed.

The S1-RDM is available in 5", 6", 7", 8", 9", 10", 12", 14", 16", 18", and 20" diameters.

The motor actuator delivers up to 18 in/lbs of torque that powers the S1-RDM open and closed. This powerful motor allows the damper to handle higher static pressures and can be modulates using the SPS Static Pressure Switch or similar type control.

Features:
• 3-wire, power open and close
• LED damper position indicators
• Neoprene gasket seal
• 24 VAC
Damper Specifications:
Construction: 22 Ga. Galvanized Steel
Linkage: Direct Drive
Motor Voltage: 24 VAC, 50/60 Hz, 6.5 Watts, 7VA
Torque: 35 in-lbs.
Temperature Rating: –4°F to 140°F Operating, –20°F to 150°F Storage
Humidity: 5% to 95% Non-Condensing
Damper Timing: Nominal 30 Sec. Powered
Connection: Screw Terminals
Duct Pressure: Maximum 4.0” W.C.

Share your knowledge of this product. Be the first to write a review »