Home > HVAC Components > ICM Furnace Control Modules - ICM284, CM287, ICM289, ICM291, ICM292, ICM2804 >

PART #: ICM2804 - BOARD CTRL IGNITION CARRIER REPLACES CES0110074-00 & CES0110074-01
PART #: S1-ICM2804
S1-ICM2804


 
Our Price: $147.40
Sale Price: $112.30
Savings: $35.10
Order Minimums: Please note the order minimum for this site is $50.00. You may be prompted at the end of your order to add additional items to your cart. You may also add an up-charge if you wish. The option for adding an up-charge will be visible when you check out.

Warning: Gas Valves, Circuit Boards (all replacement parts) Should Be Installed By A Licensed Professional. FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE!

Availability: Usually Ships in 2 to 3 Business Days
Product Code: S1-ICM2804
Qty:

Description
 
Features:
• Hot Surface Ignition (HSI) control board
• Microprocessor-based
• Controls vent motor and blower control
• Monitors limit switch, pressure switch and gas valve
• 100% lockout safety feature
• Compatible with LP or Natural Gas
• Status LED for fault codes to aid in troubleshooting
• Replaces: Carrier CES0110074-00 and CES0110074-01
Specifications:
Environment
• Ambient Temperature
Operating: -40ºF to 176ºF
Storage: -40ºF to 185ºF
• Humidity: 5% to 95% R.H. (non-condensing) @ +55ºF
• Vibration: 13.8Hz @ 0.2 Gs for one hour in each
orthogonal axis
Electrical
• Voltage Range: Line (98-132 VAC) @ 60Hz
• Cool Blower: 20A, 2 HP, 240 VAC
• Heat: 10A, 240 VAC
• Inducer Motor: 4A FLA, 8A LRA @ 120 VAC
Timing
• Inducer Pre-Purge Time: 1 second
• Heat Blower On Delay: 45 seconds
• Heat Blower Off Delays: 120 or 180 seconds
• Cool Blower On Delay: 1 seconds
• Cool Blower Off Delay: 1 seconds

Note: This board functions identically as the CES0110074-00 and the CES0110074-01. It is a direct replacement of the CES0110074-01. When replacing the CES0110074-00 some quick connectors have to be changed or added. EAC-1 and EAC-2 must have 1/4” connectors. COM, SEC-1 and SEC-2 must have 3/16” connectors.

Share your knowledge of this product. Be the first to write a review »