Home > Indoor Air Quality > Honeywell C7232 Carbon Dioxide (CO2) Sensor >

PART #: C7232A1008 - CO2 SENSOR
PART #: S1-C7232A1008
S1-C7232A1008


 
Our Price: $393.13
Order Minimums: Please note the order minimum for this site is $50.00. You may be prompted at the end of your order to add additional items to your cart. You may also add an up-charge if you wish. The option for adding an up-charge will be visible when you check out.

Warning: Gas Valves, Circuit Boards (all replacement parts) Should Be Installed By A Licensed Professional. FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE!

Availability: Usually Ships in 2 to 3 Business Days
Product Code: S1-C7232A1008
Qty:

Description
 

Honeywell C7232 Carbon Dioxide (CO2) Sensor

The Carbon Dioxide (CO2) Sensors and Controllers are stand-alone carbon dioxide (CO2) sensors for use in determining
ventilation necessity with HVAC controllers. The sensor measures the CO2 concentration in the ventilated space. (These
models are wall-mount only.) The sensors are used in ventilation and air conditioning systems to control the amount of
fresh outdoor air supplied to maintain acceptable levels of CO2 in the space.
Features:
• Models available with LCD that provides sensor readings and status information.
• Non-Dispersion-Infrared (NDIR) technology used to measure carbon dioxide gas.
• Gold-plated sensor provides long-term calibration stability.
• C7232 provides voltage or current output based on CO2 levels.
• Models available with SPST relay output.
• Proportional plus Integral (P+I) control algorithm.
• Used for CO2 based ventilation control (Demand Control Ventilation (DCV)).
• Automatic Background Calibration (ABC) algorithm based on long-term evaluation reduces required typical zero-drift
check maintenance.
• Digital input with programmable delay time for occupancy function using a sensor, pushbutton, or switch.
Specifications:
Mounting: Wall
Display: Yes
Carbon Dioxide Range: 0 to 3000 ppm
Analog Output: 0/2 to 10 Vdc or 0/4 to 20mA w/ one relay output
Relay Output: One: Normally Open SPST
Accessories: 32002181-001: Zero Calibration Service
Accuracy: 5% full scale
Timing (response): 2 minutes


Share your knowledge of this product. Be the first to write a review »