Home > Chemicals
Chemicals
  • HVAC System Hygiene
  • Super Concentrated Coil Cleaners
  • Drain Tabs & Lubricants
  • Leak Detector & Insecticide
  • Air-Cooled Equipment & Filter Cleaning
  • Coil Protection & System Flushing
  • Sprayers & IAQ Assurance
  • Scale Removal/Descaling
  • ICE Machine Cleaning & Filtration
  • Cooling Tower Water Treatment
  • Closed System & Glycol Water Treatment
  • Feeding Equipment & Lubricant Products
  • Refrigeration Oils & Vacuum Pump Oil
  • Gas Leak Detectors & Insulation Products
  • Specialty Products & Aerosols & Tape & Tape Dispensers
  • Water Based Duct Sealants & Solvent Based Duct Sealant
  • Solvent Based Insulation Adhesive & Water Based Insulation Adhesive
  • Elastomeric Tape/Rolled Sealant & Caulk, Caulk Guns & Pipe Joint Compound
  • Pipe Joint Compound, Foam Sealant & Firestop Products
  • Furnace Cement, Smoke Cartridges, Insulation Tape & Gum
  • Corrosion Protection Products & Lubricants & Flushing Solvents
  • Acid Test Kit & Pvc Sealants & Tapes & Paints & Primers & Markers
  • Galvanizing Compound Sprays & Lubricants & Contact Cleaners
  • Degreasing Solvents & Sealants, Epoxies & Glues & Specialty Products & Aerosols
HVAC Parts by Nu-Calgon, Source 1, Boss Product, Hardcast, Diversitech and much more.

Call 800.227.9922 Monday-Friday / 8AM-5PM pacific time for more information

Browse by sub-category below or you can scroll down until you see all Chemicals.
Boss 125 Multi Seal Building Construction Sealant

Boss 125 Multi Seal Building Construction Sealant

BOSS® 125 Multi-Seal Building/Construction Sealant is a multipurpose, one part sealant, formulated
from a hybrid polymer. This unique sealant is free from solvents, silicone, isocyanates and other
hazardous raw materials. It cures on exposure to atmospheric moisture to form a highly durable flexible
sealant. Multi-Seal has been formulated to offer outstanding primerless adhesion to most common building
materials including vinyl, aluminum, steel, concrete, wood and glass. It can be applied and tooled under most
weather conditions. This sealant is paintable with most latex base paints.

Features:
• VOC Compliant in all 50 states
• Ease of use, one-part sealant, no mixing required
• Good weatherability - virtually unaffected by sunlight, rain, snow, ozone, and temperature extremes
• Good UV resistance and color stability
• Long life reliability; cured sealant stays flexible without tearing, cracking, drying out, or becoming brittle.
• With its non slump properties, can be used in vertical, horizontal and overhead joints
• Wide temperature gunnability; can be applied in any season
• Non-yellowing and non-staining
• Non-streaking
• Paintable with most latex base paints*
• Free from solvents and isocyanates
• Bonds to Kynar 500®
Boss 136 Fireblock / Draftstop Sealant

Boss 136 Fireblock / Draftstop Sealant

BOSS® 136 Fireblock/Draftstop Sealant is a single component fire rated sealant and is a
noncombustible filler caulking used for fireblocking applications in the annular space around
wires, pipes, ducts, vents, cable lines and other penetrations to the building envelope. It is a
non-slumping sealant that sets to form a hard surface. BOSS® 136 can be applied to any gap
or penetration where the specification is noncombustible and/or ASTM-E136 rated. BOSS® 136
is to be used for interior applications only. The noncombustible specification is common to one
and two family construction and to non-rated penetrations in multi family and commercial construction.
BOSS® 136 is colored red for ease of inspection. In the event of a fire BOSS® 136 will prevent the
spread of fire, smoke and toxic gases through penetration openings. BOSS® 136 has been tested
and meets the American Society for Testing Materials E-136. To pass this test a material must withstand
1,400 degrees Fahrenheit without exhibiting signs of flaming after the first thirty seconds in the test
apparatus. BOSS® 136 serves to form a “gasket or seal against air infiltration”

Features:
• Completely non toxic and contains no asbestos or PCBs.
• Noncombustible
• Applied with a conventional caulking gun
• Easily applied sealant with water clean up capabilities
• An accredited fire block/smoke seal caulk
• Single component system, no mixing necessary and no additions required
• Meets residential construction code approvals including I.R.C.
• For interior applications only
• Excellent adhesion to a wide variety of substrate material
Boss 368 Butyl Sealants

Boss 368 Butyl Sealants

BOSS® 368 Butyl Rubber Sealant is a one component skinning product for sealing standing
seam roofs and side walls. BOSS® 368provides excellent adhesion to metal, asphalt, wood,
and masonry substrates.

Uses:
• Seals standing seam roofs
• Seals side walls
• Seals gutters and downspouts
• Filling and caulking joints in heating and air conditioning ducts
• Excellent sealant for sealing joints in sheet metal
• Compatible with and suitable for use on polyurethane foam and extruded polystyrene

Specifications:
BOSS® 368 meets or exceeds the following: TT-S-001657, TT-C- 1796A, Type I, Class A. BOSS®
368 meets FDA Regulation, food additives, sub-part F, sub-paragraph 175.105 being composed of
ingredients acceptable for packing and transporting food. BOSS® 368 is acceptable to the U.S.
Department of Agriculture for use in meat and poultry processing areas under Federal Inspection.
BOSS® 368 meets ASTM-E-90 and ASTM-E-84.
Boss 370 Silicone Caulk

Boss 370 Silicone Caulk

BOSS® 370 HVAC Silicone is a one-part acetoxy cure adhesive sealant that is suitable for
general heating, ventilation and air conditioning sealing and adhesive applications. This product
will adhere to clean metal, glass, many types of wood, silicone resins, vulcanized silicone rubber,
ceramics and plastic surfaces. A primer may be required for optimum adhesion to some substrates.

Uses:
• Sealing heating, ventilating or air conditioning duct work
• Seal cracks or gaps around windows, vents, ducts, fixtures and lights
• Seal leaks in gutters, downspouts, ducts and piping
• Seal electrical connections and boxes to waterproof
• Bond gaskets in heating and refrigeration units
Boss 816 Intumescent Firestop Sealant

Boss 816 Intumescent Firestop Sealant

BOSS® 816 UL Classified Intumescent Firestop Sealant is a fire rated, general purpose
sealant for use on through-penetrations and construction joints. It is a single component,
non-sag, water based sealant and smoke seal that is easy to apply and clean up. BOSS® 816
will prevent the spread of toxic gases, water, smoke and fire through joint openings and through
penetrations. BOSS® 816 is suitable for adhesion to almost any surface and remains flexible,
making it ideal for both horizontal and vertical joints, subject to vibration or dynamic movement.
It bonds quickly, has excellent adhesion and is non-toxic. BOSS® 816 is protected against mold
growth with a combination of biocides in both wet and dry stages. It has been tested to the following
specifications: UL 1479 (ASTM E-814), UL 2079 (ASTM E-1966), ASTM E-84 (0-flame, 0-smoke),
ASTM E-90 (STC 53), Factory Mutual Approved.

Features:
• Bonds quickly with excellent adhesion
• Mildew Resistant
• Remains flexible
• VOC compliant
• Excellent freeze/thaw properties
• Safe to use and handle
• Water based and paintable
• 2 year shelf life
Bronz-Glow Technologies HVAC/R Corrosion Protection Products "Green-Fin" Aerosol Kit

Bronz-Glow Technologies HVAC/R Corrosion Protection Products "Green-Fin" Aerosol Kit

A Complete Coating System for Coils & Components of Small Tonnage HVAC/R Equipment
The “Green-Fin” Kit is designed for providing quality corrosion protection for residential systems,
PTAC’s, window units etc. A cost effective solution for effective corrosion protection on new or
existing equipment with minor corrosive damage. On average the kit will provide coverage for
15 - 17 square feet of coil face area. This product is recommended for coils not greater than two
rows in depth with fin spacing of 17 fins per inch or less. Successfully used in environments such
as: Coastal, Paper Mills, Waste Water Treatment Plants, Oil Refineries, Veterinary Facilities,
Restaurants, Food Processing Plants, Hospitals etc.

KIT CONTENTS:
1 15.5 oz. Solvent Cleaner
2 15.5 oz. Primer
3 14.5 oz. “Green-Fin”
Diversitech Precision Clean

Diversitech Precision Clean

Quickly removes oil, grease, and dirt. Biodegradable. Super industrial strength. USDA approved,
nontoxic. Slow evaporation. Doesnot contain CFCs. Does not require rinsing or wiping. Non flammable.
Conductive. Now available in a foaming aerosol!
Diversitech Presolve

Diversitech Presolve

Quickly removes oil, grease, and dirt. Natural based solvent. Moderate evaporation. Does
not contain CFCs. Does not require rinsing or wiping. Flashpoint 104°. Not conductive.
Diversitech Pro-Flush HVAC Flushing Solvent

Diversitech Pro-Flush HVAC Flushing Solvent

A flushing solvent for A/C and refrigeration systems formulated for R-410A retrofits, refrigerant conversions
and compressor burnouts. Compatible with all refrigerants and compressor oils. All solvents in Pro-Flush are
non-VOC and conform to EPA SNAP standards: low toxicity, non-flammable, residue- free. Pro-Flush is available
as a kit or in a 16 oz. solvent refill. The kit makes servicing quick, easy, and safe, as well as assuring you get to
the job site with all necessary hardware in hand for 1- stop servicing. The kit includes: 16 oz. container of Pro-Flush
solvent, refillable Pro- Flush injector tool pressure tank, pressure relief valve for added safety, large rubber adapter
that flushes up to1-1/4” line sets, service hose.
Diversitech Rust Breaker

Diversitech Rust Breaker

Quickly loosens rusted bolts, screws, shafts, piping, and all types of “Frozen” connections
and assemblies. The answer for rusty or corroded fastenings on cars, trucks, trailers, tractors,
farm machinery, appliances, washing machines, plumbing, water pumps, fishing reels, power
tools, gardening equipment, and hundreds of other mechanisms. Packaged in a handy telescoping
spout applicator.
Diversitech Smokeys

Diversitech Smokeys

Smoke emitter cartridges provide effective, low cost leak testing of heat exchangers, air ducts,
tanks and boilers. Visual air balancing of HVAC systems. Cartridges produce clean, non-toxic,
oil-free smoke through chemical reaction. Use also for fire drills as well as the placement and testing
of smoke alarms/detectors.
Diversitech Super Glue

Diversitech Super Glue

Super Glue 2- Gram Tube
Diversitech Sure - Stick Heavy Duty Adhesive Spray

Diversitech Sure - Stick Heavy Duty Adhesive Spray

This wide web spray adhesive is ideal for both temporary and permanent bonding. Waterproof,
transparent and non staining. Use for the toughest adhesive applications with leather, cardboard,
most plastics, polyethylene sheeting and insulation in HVAC applications. Cleans with mineral spirits.
Not for use on vinyl.
Diversitech Sweat- Free Pipe Insulation Spray

Diversitech Sweat- Free Pipe Insulation Spray

Sweat-Free is an aerosol spray-on insulation specifically developed for cold water pipes,
refrigeration and air conditioning lines. Stops sweating and dripping problems. Dries to a
clean, white, flexible and water-resistant coating. Adheres to galvanized, black iron, steel,
brass, copper and PVC piping.
Diversitech Thermaplex Bearing Grease

Diversitech Thermaplex Bearing Grease

Specifically developed to outperform conventional bearing greases and extend relubrication
periods, reducing maintenance requirements and grease use. Blue colored paste with excellent
load carrying properties. Temperature range -22°F to 350°F.
Diversitech Thread Sealant With Teflon

Diversitech Thread Sealant With Teflon

General purpose sealant with the lubricity of Teflon for metal pipes. Won’t shred like Teflon
Tape. Allows easy disassembly. Resists common shop fluids. -60° to 400°F temperature resistance.
Pressure resistance of 5000 PSI.
Diversitech Valve Action Markers

Diversitech Valve Action Markers

Large ink supply for increased mileage. Fast drying, smear and water resistant. Utilizes a
patented valve activated ink feed mechanism to supply ink as required, down to the last drop.
Diversitech Valve Action Paint Markers

Diversitech Valve Action Paint Markers

Bright, crisp, opaque colors. The oil-based paint is quick drying and permanent on most surfaces.
These markers also feature the patented valve operated feed mechanism and a medium point.
Diversitech White Lithium With Teflon

Diversitech White Lithium With Teflon

Pure white lubricant with Teflon additives. Provides maximum lubrication. Rust and oxidation
inhibitors protect metal. Heat and water resistant. Rapidly forms into a pure white grease that
won’t melt or wash away.
Diversitech Zerotri

Diversitech Zerotri

Quickly removes oil, grease, and dirt. Evaporates completely and very rapidly. Does not contain
CFCs. Does not require rinsing or wiping. Flashpoint is 0°F. Not conductive.
Hardcast Aluma- Grip

Hardcast Aluma- Grip

ALUMA-GRIP 701 is a HEAVY DUTY pressure sensitive, duct joint rolled sealant. ALUMA-GRIP
701 provides an aggressive water resistant grip to most surfaces including sheet metal, duct board,
flex duct, PVC coated duct, and duct wrap vapor barriers. ALUMA-GRIP 701 is suitable for subgrade
application on PVC coated duct.

Specifications:
Appearance                       Mill finish aluminum substrate with gray adhesive/sealant
Backing                              Aluminum
Thickness                          30 mils
Sealant Material                 Modified Butyl
Peel Strength                    17 lbs. per linear inch
Tensile Strength                720 psi avg.
Elongation                         560% avg.
Flexibility                           Excellent, no cracking
Bonding Time                    Instant high tack, full bond 24 hours
Time to Test                       Immediate
Service Temperature         -20°F. to 200°F.
Surface Burning                 Flame Spread: 25
                                         Smoke Developed: 50
                                         (When tested in accordance with ASTM E-84)
Weather Resistance          Passes 2000 hours QUV
                                         (When tested in accordance with ASTM G-53)
Mildew Resistance            Mold and mildew resistant
VOC                                  0 g/l
Pressure Classes             SMACNA 1/2, 1, 2, 3, 4, 6 and 10 inches w.g.
Seal Classes                    SMACNA A, B, C
Packaging                        50 ft. rolls in 2, 3, 4, 6, 9, 12 inch widths. 200 sq. ft. per case (150 sq. ft. for 9 inch)
Specifications Compliance       LEED compliant SCAQMD Rule 1168
Hardcast Foil- Grip 1402

Hardcast Foil- Grip 1402

Foil-Grip is a pressure sensitive duct joint and general purpose rolled sealant. Foil-Grip
provides an instant water resistant grip to most surfaces including sheet metal, duct board,
flex duct, PVC coated duct, and duct wrap vapor barriers. Foil-Grip is suitable for
subgrade application on PVC coated duct.
 
Features:
• Seals on Contact
• Indoor/Outdoor Use
• Printed Foil Available
• Mold & mildew resistant
• Excellent for subgrade
Specifications:
Appearance: Mill finish aluminum substrate with gray adhesive/sealant
Backing: 2 mil aluminum
Adhesive/Sealant: 15 mil Gray Matter 100% solids elastomeric modified butyl
Peel Strength: 16 lbs. per linear inch (adhesive only)
Tensile Strength: 955 psi avg.
Elongation: 560% (adhesive only)
Flexibility: Excellent, no cracking
Bonding Time: Instant high tack, full bond 24 hours
Time to Test: Immediate
Service Temperature: –20°F to 200°F
Weather Resistance: Passes 2000 hours QUV (when tested in accordance with ASTM G-53)
VOC: 0 g/l
Pressure Classes: SMACNA 1/2, 1, 2, 3, 4 and 6 inches w.g.
Seal Classes: SMACNA A, B, C
Hardcast Glas-Grip 658

Hardcast Glas-Grip 658

A fast setting, pressure sensitive insulation adhesive. The self-contained spray system
delivers a special low pressure web spray that eliminates adhesive vaporization and spray
bounce-back. Limited equipment clean-up and low equipment cost. Solvent based, yet has
limited flammability. This results in a more efficient spray system that works faster with no
equipment down time for lower operational costs.
 
Features:
• Immediate tack, strong bond
• Portable, self-contained system & spray cans
• Water and mildew resistant
Specifications:
Color: Green
Consistency: Aerosol spray
Spray Pattern: Variable web
Odor: Solvent-like
Base: Polymer
Vapor Pressure: 350 mm
Solvent: Methylene Chloride
Coverage: Approx. 80 sq. ft. per 1 lb. of adhesive. 16 oz. spray can=80 sq. ft., 12 lb.
cylinder= 960 sq. ft., 40 lb.
cylinder=3200 sq. ft.
Initial Bonding Time: 2 to 3 minutes
Dry Time: 10 minutes
Service Temperature: 35°F to 200°F
Surface Burning: Flame Spread 0, smoke developed 0 (When tested in accordance with ASTM E-84)
Flammability: Flammable when wet (flame projection test), Non-flammable when dry.
VOC: 266 g/l
Packaging: 16 oz. spray cans, 12 lb., 40 lb., 187 lb. and 375 lb. aerosol cylinders
Hardcast Insta - Tack Insulation Adhesive

Hardcast Insta - Tack Insulation Adhesive

INSTA-TACK is an instant-tack, solvent-based insulation adhesive engineered for spray booth
applications in highhumidity environments. INSTA-TACK is used when the duct section is stored
vertically or horizontally before pinning. INSTA-TACK’s exceptional coverage and fast tack provides
reduced labor and lower application cost.
Hardcast Roto-Tack Insulation Adhesive

Hardcast Roto-Tack Insulation Adhesive

ROTO-TACK is a mid-tack, nonflammable, waterbased insulation adhesive engineered
for mechanical roll coating systems that rapidly apply adhesive to insulation prior to bonding
to the sheet metal. ROTOTACK offers exceptional versatility, low viscosity, low suspended
solids and easy cleanup, providing lower application cost.
Hardcast Travel -Tack Adhesive

Hardcast Travel -Tack Adhesive

TRAVEL-TACK is a self-contained, instant-tacking portable spray system engineered to
deliver a low-pressure web spray that eliminates adhesive vaporization and overspray.
TRAVEL-TACK’s portability, limited equipment clean-up and low equipment cost make this
adhesive ideal for shop or field use.
High Temp Red Silicone Caulk

High Temp Red Silicone Caulk

BOSS® 376 Hi-Temp HVAC/R Silicone is a one-part, non- slumping paste that cures to a tough,
rubbery solid at room temperature on exposure to water vapor in the air. This silicone product was
formulated to perform at temperatures ranging from -85°F to 500°F (-65°C to 260°C). It can be used
for numerous sealing and bonding applications.

Uses:
• Sealing and encapsulating heating elements in appliances
• Stove and furnace vent pipes
• Moving oven belts
• Industrial ovens
• Bag filters on smoke stacks
• Other critical bonding, sealing, potting, encapsulating and protective coating where parts must perform
  at high temps
Hydro-Balance POE Lubricants

Hydro-Balance POE Lubricants

Available in several viscosity grades, these lubricants meet the specifications of many compressor
and equipment manufacturers including:
Carrier
Carlyle
York
Carrier Transicold
Bitzer
Bristol
Dunham-Bush
Climate Control
Danfoss
Hitachi
Mycom
Tecumseh
Blissfield
Hydro-Balance STA- Clean

Hydro-Balance STA- Clean

Condensate Pan Strips
Features:
• EPA registered, timed-release control of microbial contaminants in condensate pans
• Kills mold, algae, fungus and other microorganisms
• Lasts up to 6 months
• Place in drain pan as far from drain as possible
Hydro-Balance Synthetic Ester Lubricants

Hydro-Balance Synthetic Ester Lubricants

Features:
• Excellent lubricating properties over a wide temperature range
• OEM Approved
• Specially formulated for use with HFC refrigerants
Insulating Tapes

Insulating Tapes

Features:
• Effectively insulate hot or cold pipes
• Stop condensation and drip
• Firmly adhere to all nonporous surfaces and to itself for multiple wrap applications
• Molds easily around valves and fittings
• Will not shrink or dry out
Neutronic Odor Neutralizer

Neutronic Odor Neutralizer

Features:
• Neutralizes malodors without the use of heavy perfumes
• Use in air ducts or anywhere foul odors are present
• Hotels, apartments, homes, RVs, boats, hospitals, bathrooms, etc.
• Remove gel from container and place on lid
• Neutralizes malodors without the use of heavy perfumes
Nu-Calgon A/C Re-New

Nu-Calgon A/C Re-New

A/C Re-New, formerly Zerol Ice, has been used successfully for many years to
improve the performance of airconditioning and refrigeration systems. A/C Re-New
provides significant saving in energy use. It also quiets noisy systems and extends
the life of the system. It is a lubricant that blends with the system’s oil, lasting for
the life of the equipment.

Features:
Quiets noisy compressors.
Reduces energy consumption.
Improves heat transfer in the evaporator and condenser.
Great for new and old systems.
Nu-Calgon Aerosol Degreasing Solvent EF

Nu-Calgon Aerosol Degreasing Solvent EF

Degreasing Solvent EF is an “environmentally friendly” degreasing solvent, specially formulated
for cleaning and degreasing equipment where washing or flushing is not possible. Simply spray
it on and wipe it off. Penetrates quickly and deeply, loosening and liquefying heavy greases and
tar. It is noncorrosive, non-staining and has a dielectric strength over 26,000 volts.
Nu-Calgon Bio- Fresh Fogger

Nu-Calgon Bio- Fresh Fogger

The Bio-Fresh Fogger is made of a one-piece, seamless heavy-duty copolymer. It uses a
48” flexible hose and it isadjustable from 0–18 oz. per minute with the respective particle
size at 20–80 microns.
Nu-Calgon Break-N Lube Penetrating Lubricant

Nu-Calgon Break-N Lube Penetrating Lubricant

This advanced technology 4-in-1 product is made with Cerflon® for high performance
in a non drying penetrating lubricant. It’s highly versatile with the ability to penetrate,
lubricate, displace moisture, and provide superior resistance to corrosion. It’s especially
formulated to help free frozen parts and assemblies.
Nu-Calgon CMS Feed Pump

Nu-Calgon CMS Feed Pump

This pump is a microprocessor controlled positive displacement diaphragm type pump.
It is adjustable from 0.026 gallons feed per day to a maximum of 15 gallons per day.
Encoder switch allows for exact setting of pump strokes per minute. Also includes adjustment
of stroke length.
Nu-Calgon CMS-lV Cooling Tower Monitor System

Nu-Calgon CMS-lV Cooling Tower Monitor System

The newest innovation for monitoring conditions in cooling towers and evap
condensers, and providing subsequent bleed-off and chemical feed. The
CMS-IV features a combination monitor and pump engineered into one piece of
equipment. The Pump/Monitor can feed up to 15.1 gallons of treatment per day,
but can be adjusted to feed as low as 0.0021 gal. per day. The monitor’s
frequency can be adjusted from a maximum of 125 strokes per minute to as
low as 1 stroke per hour. Stroke length is also adjustable. The unit can utilize
any one of 5 feed-timer options, andthe complete system does include a solenoid valve.
Nu-Calgon Cork Insulation Tape

Nu-Calgon Cork Insulation Tape

Cork Insulation Tape has been developed specifically for the air conditioning and refrigeration
industry. Through detailed research and extensive testing, this tape has been formulated and
manufactured to meet specific Nu-Calgon specifications as an insulating material for preventing
sweating and condensation on refrigerant lines, cold pipes and other commercial refrigeration
and air conditioning systems. It also can serve as an excellent insulator on hot pipes, and can be
used as gasketing material and as sound-deadening material. It can also be used for wrapping
valves, tees and fittings, and can be applied at temperatures as low as –30°F.
Nu-Calgon Drip Feeders No. 215 & No.1075

Nu-Calgon Drip Feeders No. 215 & No.1075

The No. 215 Drip Feeder is used for feeding No. 340 Liquid Scale Inhibitor,
Cal-Treat 233, Ty-Ion C70 and No. 85Algaecide. Each feeder is individually
calibrated at the factory to insure accurate feeding. Provides the benefits of
continuous treatment for small systems without the high cost usually associated
with automatic feeding equipment. The 1075 Drip Feeder is used for feeding the
same chemicals as the No. 215 Drip Feeder except that the flow rate is five times
greater. Generally recommended for systems larger than 60 tons.
Nu-Calgon EasyDry

Nu-Calgon EasyDry

A/C EasyDry eliminates moisture in the system
Features:
Treats 1.5 to 5 ton systems
Compatible with all oils and refrigerants
Prevents acid from forming
Complements the system’s drier
Nu-Calgon Electrical Contact Cleaner

Nu-Calgon Electrical Contact Cleaner

Electrical Contact Cleaner cleans, lubricates and protects electrical contacts from corrosion,
and is safe on most plastics. Cleaning action quickly removes greases, dust and oxidation,
restores and maintains precision and efficiency to the instrument and component. Includes
extension tube for pinpointing application.
Nu-Calgon Evap Foam No Rinse

Nu-Calgon Evap Foam No Rinse

A high performance, heavy duty coil cleaning detergent. It is formulated with special
surfactants and alkaline cleaners that have been developed into a foaming, no-rinse
product. Evap Foam is ideal for use on most coils, but it is particularly suited for use on
cooling or evaporator coils. The aerosol can be sprayed either right side up or upside down.
Nu-Calgon Evap-Treat

Nu-Calgon Evap-Treat

Preventative Maintenance & Treatment for Evaporative Coolers

Features:
• Prevents scale & corrosion
• Inexpensive—lasts all season
• Easy to install
• Increases pad life
• Maintains cooler performance
• Utilizes 6R Micromet a foodgrade NSF-certified polyphosphate
Nu-Calgon Fluorescent Gas Leak Detector

Nu-Calgon Fluorescent Gas Leak Detector

A fluorescent formulation that provides improved visibility and long lasting bubbles.
It is non-corrosive to metals and is freeze protected to 0°F. Suitable for high and low
temperature applications. Can be used for most refrigerants, natural gas and oxygen
systems.
Nu-Calgon Foam Insulation Tape

Nu-Calgon Foam Insulation Tape

This economically priced tape is formulated from quality thermal insulation material. It utilizes
closed-cell construction and can be used on cold water pipes, chilled water lines and refrigerant
lines to prevent sweating and condensation. It can also be used on hot water lines for better insulation
against heat loss. Can be overlapped or edges can be butted.
Nu-Calgon Food Grade Silicone

Nu-Calgon Food Grade Silicone

Food Grade Silicone sprays a perfect non-stick surface on ice machine surfaces, vending machines,
coin slots, slicing machines, dairy machinery and other food processing and packaging equipment. An
excellent lubricant that prevents binding and sticking. Contains ingredients F.D.A.-approved for food contact use.
Nu-Calgon Freez-Kontr'L

Nu-Calgon Freez-Kontr'L

A complete heat transfer fluid and anti-freeze based upon non-toxic propylene glycol. It is formulated to provide
corrosion protection and freeze protection for chilled water, hydronic and other closed systems. Safe to use where
contact with potable water is possible.
Nu-Calgon Freez-Therm

Nu-Calgon Freez-Therm

A complete, inhibited heat transfer fluid and anti-freeze based upon ethylene glycol. It can be used in chilled water,
hydronic and other closed systems for both freeze point suppression and corrosion inhibition. Formulated with a
green/yellow dye for product identification and leak detection. An uninhibited version is also available in drums on
special order.
Nu-Calgon Gas Leak Detector

Nu-Calgon Gas Leak Detector

A high viscosity liquid that forms bubbles when daubed on a gas leak. Non-corrosive,
non-staining, harmless to skin. Detects any type of gas leak such as air, compressed air,
CO2, nitrogen, natural gas and refrigerant gases. Freeze point is well below 0°F. Six ounce
plastic bottles have dauber in cap.
Nu-Calgon Green Clean

Nu-Calgon Green Clean

A pleasantly scented, all-purpose cleaner designed for the rapid removal of grease and other
heavy soils. It can be used right out of the bottle or diluted for milder jobs. Biodegradable
Nu-Calgon IMS-ll Sanitizing Concentrate

Nu-Calgon IMS-ll Sanitizing Concentrate

IMS-II is an EPA-registered sanitizing concentrate formulated exclusively to sanitize hard, non-porous surfaces to eliminate odors
and slime growths. No rinsing is required. Formulated for general use in ice machines, ice cream dispensing equipment and other
food processing equipment.
Nu-Calgon Insulation Sealing Cord

Nu-Calgon Insulation Sealing Cord

Insulation Sealing Cord is a non-staining sealer formulated from the highest quality
raw materials. It is waterresistant,dust-resistant and white in color with excellent
adhesion to most surfaces and excellent insulation value. It is available as a pre-shaped
extrusion with serrated release paper.
Nu-Calgon Insulation Sealing Slugs

Nu-Calgon Insulation Sealing Slugs

Sealing Slugs compound is formulated and manufactured for use in many sealing,
insulating and general maintenance applications. It has excellent adhesion capability
and is non-staining, non-hardening and unaffected by wide variations in temperature—
an excellent thumbing grade. It is packaged in 2-lb. boxes; each box contains two 1-lb. bars.
Nu-Calgon Micro-plus

Nu-Calgon Micro-plus

The complete all-in-one treatment for ice machines, coffee urns and brewers,
beverage machines and other equipment or systems using water such as humidifiers,
steamers, etc. The Micro-Plus “in-line” treatment units contain 6R Micromet for the control
of scale. They also contain high-grade activated carbon for eliminatingobjectionable tastes
and odors, and filter discs to remove silt and sediment as small as 20 microns. Micro-Plus
is available in four sizes, and all are constructed of a two-piece, spun-welded polypropylene
design. They are provided with 1/4” FPT connections, allowing for the use of compression
fittings, flare fittings or “quickdisconnect” fittings. When properly sized, Micro-Plus Treatment
Systems will last up to six months.All units are constructed of NSF approved polypropylene,
and are tapped on each end with 1/4" FPT. Installer may then utilize flare fittings, compression
fittings or the male plug for quick disconnect fittings.
Nu-Calgon Micromet Feeder NO. 215 & NO. 1075

Nu-Calgon Micromet Feeder NO. 215 & NO. 1075

Steel tanks suitable for pressures up to 150 psi and temperatures up to 212°F. Uses
3/4-inch FNPT connections for installing on bypass to any size line. Use No. 20L Feeder
for initial charge up to 20 pounds. No. 100L Feeder for initial charges up to 100 pounds.
Nu-Calgon NO. 31-TX Acid Pump & HK-31 Hose Kit

Nu-Calgon NO. 31-TX Acid Pump & HK-31 Hose Kit

The No. 31-TX Acid Pump is a compact submersible pump designed for circulating strong acids and cleaning
solutions. All parts are constructed of acidresistant materials. Motor is protected by thermal overload that stops pump
if temperature exceeds 140°F.
The HK-31 Hose Kit is an accessory for use with the No. 31-TX Acid Pump.
The kit includes two 1/2-inch tubing adapters, two 10-foot sections of 1/2-inch clear plastic tubing and three hose
clamps.
Nu-Calgon NO. 340 Liquid Scale Inhibitor

Nu-Calgon NO. 340 Liquid Scale Inhibitor

A unique inhibitor that is extremely effective in hard or highly alkaline water. No. 340
Liquid Scale Inhibitor is stable and does not form any orthophosphate sludge. It is
most effective at treatment levels between 10 and 15 parts per million (about 1 gallon
of No. 340 per 100,000 gallons of water). A feed rate of 1/2 gallon per month is recommended
for each 30 tons and 1 gallon per minute bleed-off. A constant, accurate feed is accomplished
with the No. 215 Drip Feeder on systems up to 60 tons. For larger systems, a No. 1075 Drip
Feeder or CMS Feed Pump should be used.
Nu-Calgon Nu-Blast Condenser Coil Cleaner

Nu-Calgon Nu-Blast Condenser Coil Cleaner

A “no-rinse formula” condenser coil cleaner in a convenient aerosol package.
Double action of high pressure blast and solvent cleaning restores efficiency
of condenser coils. Nu-Blast formula is non-conductive and non-flammable.
Nu-Calgon Nu-Foam Expanding Sealant

Nu-Calgon Nu-Foam Expanding Sealant

Nu-Foam is an expanding polyurethane prepolymer foam that is used as a sealant and
an insulating product. It can be used to seal and insulate areas such as openings created
for refrigeration, air conditioning and heating tubes or pipes, duct joints, utility penetrations
in exterior sheeting, masonry, concrete or wood walls, and other areas where unwanted air
penetration might occur. Contains no CFCs nor HCFCs, and yields more insulation than
similar competitive packages.
Nu-Calgon Nu-Kill ll Wasp & Hornet Killer

Nu-Calgon Nu-Kill ll Wasp & Hornet Killer

A “quick-kill” spray formulation based upon a synergistic formulation of both tetramethrin and permethrin.
It instantly and effectively kills wasps, hornets and yellow jackets, from distances of up to 20 feet. Kills with
residual action as wasps and hornets return to their nests. The formula is safe in and around electrical
equipment, having a dielectric strength of 47,000 volts.
Nu-Calgon Pan-Spray Leak Sealer

Nu-Calgon Pan-Spray Leak Sealer

Pan-Spray is a quick and easy to use waterproof rubberized coating that won’t chip,
flake or peel. It’s ideal for sealing out rust and corrosion as well as leaky condensate
pans, cooling towers, swamp coolers, roofing, gutters and downspouts. Pan-Spray is
the perfect solution for emergency and permanent repair. Dries in about 30 minutes and
one can will cover 20 square feet.
Nu-Calgon Pan-Treat Condensate Pan Tablets

Nu-Calgon Pan-Treat Condensate Pan Tablets

Left untreated, condensate pans can suffer from the build-up of sludge, scum
and other accumulations. This build-up can cause odors as well as plugged
drains and overflows, which in turn result in water damage. Pan-Treat is formulated
with ingredients proven effective in cleaning and preventing these deposits, and its
use will eliminate the extra maintenance costs associated with odors, plugged drains
and overflows. Pan-Treat is extremely easy to use, and is safe, non-corrosive, non-toxic
and biodegradable. The product is completely soluble in water and it does not form any
deposits in the pan or drain.
Nu-Calgon Panpads

Nu-Calgon Panpads

A revolutionary package-design of a product formulated especially to eliminate the
buildup of bacteria and slime growths in air conditioning and refrigeration condensate
drain pans. Combats a broad spectrum of harmful bacteria, including Legionella. Each
size will provide adequate treatment for up to 6 months.
Nu-Calgon Phase lll Refrigeration Oil

Nu-Calgon Phase lll Refrigeration Oil

Formulated for use on POEs as well as mineral oils and alkylbenzenes. An inexpensive,
disposable test kit that provides proofpositive that acid level in refrigeration lil is safe or
unsafe. Phase separation makes it easy to see  change in color of acid indicator (even
if a leak detection dye has been added to the oil).  Just two bottles to work with. No glass
to break open. Simple, safe, accurate and small  enough so you can carry several in your
tool box.
Nu-Calgon Pipe-Dri Cold Pipe Insulation Spray

Nu-Calgon Pipe-Dri Cold Pipe Insulation Spray

Aerosol insulation which provides a moisture barrier to stop sweating and dripping on
refrigeration lines, air conditioning lines and other cold surfaces. Quickly adheres and
dries to a hard waterproof coating. Pipe-Dri makes it possible to insulate hard-to-reach
areas.
Nu-Calgon Presst-O-Cel Foam Insulation Tape

Nu-Calgon Presst-O-Cel Foam Insulation Tape

Presst-O-Cel Foam Insulation Tape is formulated from the highest quality elastomeric
thermal insulation material. It is manufactured in accordance with selected specifications
to meet the needs of today’s air conditioning, refrigeration applications. Its closed cell
construction seals out air, retarding heat transfer and providing complete insulation. It can
be used on cold water pipes, chilled water and refrigerant lines to prevent sweating and
condensation. Foam Tape can also be used on hot water lines for better insulation
against heat loss. Keeps cold lines cold ... and hot lines hot. Can be overlapped or edges
can be butted.
Nu-Calgon Quick Seal Pipe Repair

Nu-Calgon Quick Seal Pipe Repair

Quick Seal Pipe Repair is a knitted fiberglass impregnated tape that is designed for quick,
in-the-field repair of leaks. It can be used on both cold and hot water pipes as well as refrigeration,
plumbing, industrial, commercial, mining, marine, municipal and residential applications. It bonds
to all types of pipes and is classified as safe for potable water by Underwriters Laboratories in
accordance with ANSI/NSF Standard 61.
Nu-Calgon RX-Acid Scavenger

Nu-Calgon RX-Acid Scavenger

A better, more convenient way to neutralize or “scavenge” acid in refrigeration or
air conditioning systems after burnouts or during normal ongoing system maintenance.
Normal dosage rate is 2 fl. oz. of Rx-Acid Scavenger for every one gallon of system
oil—50% less than other acid neutralizing products. This “low treat” feature means far
less material has to be added to the system. In addition, the Rx-Acid Scavenger can be
used with all lubricants: mineral, alkylbenzene and polyol ester. This means only one
product in the tool box or on the truck for all acid neutralizing needs.
Nu-Calgon Special HD CalClean

Nu-Calgon Special HD CalClean

The best cleaner available. It is specifically formulated to remove tobacco tars from
electronic air cleaners as well as the most stubborn deposits from finned coils. Use
at a ratio of 5 parts water to 1 part HD CalClean, Biodegradable. This product is also
available in a 6:1 dilution, readyto- use form, CalClean HD-RTU, packaged in quart
bottles with spray pump.
Nu-Calgon Spray Adhesive

Nu-Calgon Spray Adhesive

Spray Adhesive is a fast-drying, all-purpose product that provides a strong, water-resistant,
flexible bond. It is translucent and does not penetrate or soak material causing bleed-through.
Spray Adhesive is excellent for labeling, bonding, splicing and sealing paper, cardboard, cloth,
rubber, Styrofoam, canvas, leather, wood and most plastics.
Nu-Calgon Spray-N-Bond Insulation & Duct Liner Adhesive

Nu-Calgon Spray-N-Bond Insulation & Duct Liner Adhesive

A wide web spray adhesive formulated specifically for insulation and duct liner applications.
It is ideal for porous surfaces. It is waterproof, flexible, transparent and non-staining, and it
can be used for both temporary or permanent bonds. Formulated with the environment in mind,
it contains no chloronated solvents or ozone depleters, and it is voc-compliant in states such as
California.
Nu-Calgon Thermo- Trap

Nu-Calgon Thermo- Trap

A heat absorbing paste designed to isolate heat encountered in soldering, welding and brazing,
thereby preventing damage to nearby heat sensitive controls, fittings or other materials.
Nu-Calgon Ty-ION B20

Nu-Calgon Ty-ION B20

A liquid nitrite-borax corrosion inhibitor and dispersant for closed recirculating systems.
It combines corrosion inhibitors, a unique copolymer dispersant, and a color indicator into
a complete treatment for both hot and chilled water closed systems containing ferrous and
non-ferrous metal components. The color indicator facilitates leak detection and proper
treatment residuals.
Nu-Calgon TY-ION C70

Nu-Calgon TY-ION C70

An all-organic liquid scale, deposit and corrosion inhibitor for use in open recirculating
cooling water systems, evaporative condensers and air washer systems. This treatment
program is particularly effective in preventing scale deposits in systems which utilize make-up
water with high scaling potentials.
Nu-Calgon V-Belt Dressing

Nu-Calgon V-Belt Dressing

V-Belt Dressing is specially formulated to penetrate and extend modern v-belt life. It is
specially formulated and designed to maintain v-belt efficiency and performance under
today’s increasing performance requirements. It keeps belts pliable, prevents slippage and
does away with squealing and chattering.
Nu-Calgon Vacuum Pump Oil

Nu-Calgon Vacuum Pump Oil

Nu-Calgon Vacuum Pump Oil is a quality, high-grade lubricant that performs at the
deepest vacuum. It has a very low vapor pressureand it has excellent lubricity for
complete surface protection. It contains no additives or detergents. In addition, its broad
package line guarantees the right package size for all levels of service activity from performing
an occasional evacuation to conducting several every day.
Nu-Calgon Winter Treat

Nu-Calgon Winter Treat

System heating boilers can be troubled with water related problems such as scale formation,
sludge and corrosion, which in turn can lead to other troublesome situations like foaming surging.
Proper treatment with a product like Winter-Treat can prevent these problems, enabling the steam
boiler to perform at its designed capacity. Winter-Treat will buffer and balance water conditions,
preventing both scale corrosion while keeping the boiler free of sludge. Winter-treat is a true
multipurpose treatment. Closed systems such as hot water heating boiler and even closed chilled
water systems are easily plagued with corrosion problems in the absence of treatment. Winter-Treat
contains all the necessary ingredients to buffer the water's pH and balance, passivating the metal
surfaces and inhibiting corrosion. In addition to all its preventative abilities, Winter- Treat also cleans
boilers that are already fouled with deposits and corrosion.

Application:
Add one quart of Winter-Treat for every 25 gallons of water and let it circulate through the system for
1-3 hours. Drain, flush and treat the system with one quart for every 25 gallons.

Features:
• Emulsifies and cleans away rust, corrosion deposits and sludge
• Inhibits system corrosion, foaming and surging
• Inhibits lime scale
• Buffers and balances water conditions
• Typical use is one quart per 25 gallons of water
Nu-Calgon Zerol Ice

Nu-Calgon Zerol Ice

Enhances Compressor Lubricants

Features:
• Reduces energy consumption 5% to 10% as a result of enhanced lubricity and lower
  friction drag

• Improves heat transfer in the evaporator and condensor by improving oil return, ultimately
 reducing the oil layers' inner surface

• Pressurized container designed for R-22 systems… one can treats systems up to 5 tons.
 Use multiple cans for larger systems.

• Compatible with all oils as well as CFC, HCFC and HFC refrigerants, and typical system
 materials

When introduced to an air conditioning, refrigeration system, Zerol Ice enhances the lubricity
of the oil—mineral, alkylbenzene or POE—ultimately reducing friction drag in the compressor.
And because of the reduced drag, energy consumption as shown in testing is reduced and
equipment service life is increased. The product also enhances the hydrodynamic of fluid properties
of the oil. This helps lubricity as well, but it also results in small gains in heat transfer or cooling
performance in the evaporator. Zerol Ice is packaged into a pressurized container that is designed for
use on R-22 systems. One can treats up to a 5 ton system, and larger R-22 system (i.e. packaged units)
can be easily treated using one can for every 5 tons.
Nu-Calgon Zerol Refrigeration Oils

Nu-Calgon Zerol Refrigeration Oils

Zerol Refrigeration is a high quality, synthetic alkylbenzene refrigeration oil. It is similar in many ways to natural
mineral oil but has superior properties that make it particularly valuable in refrigeration and air conditioning
applications. It is available in three viscosities:
Zerol 150 = 150 SUS
Zerol 200TD = 200 SUS
Zerol 300 = 300 SUS
Zerol Refrigeration Oil is recommended for use in all refrigeration and air conditioning applications using CFC and
HCFC refrigerants. It is highly recommended by refrigerant and compressor manufacturers for use with the HCFC
blends such as R401A and R409A as it provides many distinct advantages: excellent miscibility, thermal stability and
compatibility with mineral oils. It is the oil of choice for R-22 and R-502. It is also an excellent clean-up/flushing oil.
OEM Approvals: Copeland (Zerol 200TD), Danfoss, Tecumseh and Bristol, among others.
Nu-Calgon Zinc Rich Cold Galvanizing Compound

Nu-Calgon Zinc Rich Cold Galvanizing Compound

Zinc Rich Cold Galvanizing Compound is highly resistant to nearly all forms of corrosion.
Perfect for repairing factory galvanized material damaged in shipment, welding, assembly, etc.
Its 95% pure zinc film fuses itself to iron, steel or aluminum. Blends well with hot-dip coating.
Oatey Pipe Joint Compound

Oatey Pipe Joint Compound

A fast set non-hardening paste which lubricates and seals threaded joints. Nontoxic and may be used
on water, natural gas, stem and air lines. Perfect for applying gaskets to flanges. Packaged with a brush
top applicator.
Oatey Pipe Joint Compound With Teflon

Oatey Pipe Joint Compound With Teflon

A white, non-hardening, non-separating Teflon paste seals all threaded connections against
leakage for internal pressure. Withstands 10,000 PSI at -100 F to 600 F, and formulated for
use on water steam, natural and LP gas, oil, caustics, or dilute acid lines. Can also be used
with PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel or copper threads. Do not use on
oxygen, fluorine, or molten metal lines. Package with a brush top applicator.
Oatey PVC Cement & Primer

Oatey PVC Cement & Primer

All Purpose Cement: Heavy bodied clear cement for use on ABS, PVS, PVC, or
CPVC pipe & fittings. Flows freely & provides a thick layer of cement on the pipe.
Exceeds ASTM D-2564, D-2846, D-2235, F-493. Application temperature: 40°F to 100°F

All Purpose Purple Primer: removes dirt, grease & grime. Flows freely and evaporates
quickly. Temperature application 40°F to 100°F. For use on PVC & CPVC pipe & fittings. Softens pipe
surface to allow for a fast, secure & permanent solvent weld.

Regular Clear Cement: for PVC pipe & fittings, up to 4" Sch. 40 & up to 2" for Sch.80
potable water pressure pipe, gas conduit, drain waste & vent pipe. Apply at temperatures 40°F to 100°F.

Clear All Weather Cement: For PVC pipe, good in all types of weather.

All Purpose Cleaner: A clear fast acting cleaner for use on ABS, PVC, & CPVC pipe & fittings,
all schedules & diameters. Does not penetrate pipe surface. Apply at temperature 40°F to 100°F.

CPVC Medium Orange Cement: Medium-Bodied Orange cement for use on all schedules and
classes of CPVC pipe and fittings up to 6” diameter with interference fit.

PVC Rain-R-Shine Blue Cement:Medium-bodied blue cement for use on all schedules and classes
of PVC pipe and fittings up to 6” diameter with interference fit. Recommended for pool, irrigation, potable water, pressure
pipe, conduit and DWV. Very fast-setting “Hot” cement formulated for wet conditions and/or quick pressurization and fast
installation.
Plasti-Kote All Purpose Enamel

Plasti-Kote All Purpose Enamel

An all purpose premium quality alkyd enamel formulated with an exclusive resin system that out performs
ordinary enamels. Fights rust and is non-fading. 15-49% more square foot coverage vs. other brands.
Plasti-Kote General Purpose Spray Paint

Plasti-Kote General Purpose Spray Paint

New, more complete line of professional quality fast drying spray paints. Color code compressors or refrigerant
recovery cylinders to match standard refrigerant identifying colors. Touch up equipment housings.
Plasti-Kote High Temp Spray Paint

Plasti-Kote High Temp Spray Paint

An ultra high temperature coating formulated to resist temperatures up to 1500°F. Great for use on boilers,
furnaces, steam pipes, chimney collars, compressors and engine manifolds.
Plasti-Kote Spray Any Way Enamel

Plasti-Kote Spray Any Way Enamel

Finally an aerosol paint that sprays in any direction without clogging. We guarantee it! Dries tack free
in 10 to 20 minutes; fully dry in just one hour. Excellent corrosion and solvent resistance. Resists heat
up to 250°F.
Premier Aerosol Packaging Touch Up Paints

Premier Aerosol Packaging Touch Up Paints

Features:
• Acrylic lacquer
• Semi gloss
• For minor repair of painted parts

Scotch 35 Vinyl Electrical Tape

Scotch 35 Vinyl Electrical Tape


This 7 mil premium grade electrical vinyl tape stretches to conform to virtually any shape that
requires color-coded insulation. Abrasion and weather resistant. Measures 3/4” x 66’.
Scotch 3M Super 33+ Electrical Tape

Scotch 3M Super 33+ Electrical Tape

Premium grade, 7 mil thick, all-weather vinyl insulating tape. Performs continuously in a temperature ambient of up
to 220°F and as low as 0°F. Resealable plastic case. Made in USA.
Scotch 3M Super 88 Electrical Tape

Scotch 3M Super 88 Electrical Tape


Premium grade, 8.5 mil thick, all-weather vinyl insulating tape. Performs continuously in a temperature
ambient of up to 220°F and as low as 0°F. Excellent resistance to abrasion, moisture, acids and corrosion.
Packaged in a resealable plastic case. Made in the USA.
Sealing Gum

Sealing Gum

Features:
• Easily formed by hand to any shape
• Seals out dust and moisture from joints
• Will not dry out or crack
• Firmly adheres to nonporous surfaces
Source 1 Vacuum Pump Oil

Source 1 Vacuum Pump Oil

Features:
• Highly demulsifiable—separates from water in 25 minutes at 180°F
• Loosens dirt and sludge and cleans pump
• Combination of additives makes for true anti-wear lubricant and lengthens pump life
• Anti-rust ingredient protects internal parts
• Convenient flip-top on quart bottle
• Filtered to 1 micron for high purity
Venture Tape Corp. Duct & Foil Tape

Venture Tape Corp. Duct & Foil Tape

Cloth Duct Tapes Provide A Reliable Bond For A Variety Of Duct Surfaces.

Cloth Duct Tapes are available in several varieties to suit a range of conditions. All tapes are
coated with a rubber pressure-sensitive adhesive system for a strong hold. All tape rolls measure
2"W x 60 yards and are sold in case quantities of 24. General Purpose Duct Tape is made using
premium-quality polyethylene. Applies easily and will not curl when unwound and conforms well
to irregular surfaces. Available in Black, Silver or White. Premium Cloth Duct Tape is made with a
higher-strength polyethylene coat and applies easily to sheet metal duct. Tears straight and will not
curl when unwound. Available in Black or Gray. Silver Metalized Cloth Duct Tape are made using a
high-quality metalized polyethylene cloth. High tack and high peel. Ideal for use on fiber ductboard,
flexible duct and sheet metal duct.
Wagner Adhesive Sealant

Wagner Adhesive Sealant

For refrigerant sealing. Eliminates fastener loosening, leakage, and corrosion. Cures between
thread flanks to seal against leakage and prevents thread corrosion. Offers sealing with maximum
solvent resistance to the action of refrigerant (11, 12 and 22), ammonia and sulfur dioxide. Withstands
corrosive liquids used in metal finishings and process industries. Ideal sealant for refrigeration, A/C,
and process equipment using corrosive chemicals.
Wagner Product Coil Guard C-20

Wagner Product Coil Guard C-20

For Protection of Coils and Housings From Rust and Corrosion
Coil Guard is ideally used in coastal areas where salt air accelerates rust and decay of A/C and
refrigeration equipment. It is, however, highly recommended for use in all geographical areas to
prolong the life of a unit and to protect condensers against industrial pollutants and oxidation.
When applied properly, Coil Guard dries quickly, and immediately resists salt spray, alcohol, acids,
and soap solutions. Weather will not blacken it. Coil Guard has high dielectric properties AND HAS
NO EFFECT ON HEAT TRANSFER.

Features:
• Protects against industrial pollutants, salt, acids, etc.
• Ideal for evaporator coil protection in food service applications
• Effective on all coils up to 24 fins/inch
• Protects evaporator coils against the build-up of the sources of Dirty Sock Syndrome
• Clear
WD- 40

WD- 40
Loosens rusted parts. Stops squeaks. Removes tar, grease and adhesives. Displaces moisture.
Protects metal. New Smart Straw 8-oz. can.
Sort By:
Page of 1
PART #: 01302983700 - COATING COIL GUARD 20 OZ SPRAY CAN CG-AER PART #: 14145 - CARTRIDGE SMOKE 45SEC/150 CU FT PK OF 10 PART #: 14175 - CARTRIDGE SMOKE 75 SEC/600CU FT PK OF 10
Our Price: $29.67
Sale Price: $24.02
Savings: $5.65
Our Price: $17.64
Sale Price: $14.28
Savings: $3.36
Our Price: $21.00
Sale Price: $17.00
Savings: $4.00
PART #: S1-01302983700 PART #: S1-14145 PART #: S1-14175
PART #: 14250 - CARTRIDGE SMOKE 2.5-MIN/1000CUFT PK OF 5 PART #: 14340 - CARTRIDGE SMOKE 4-MIN/2500 CU FT PK OF 5 PART #: 14460 - CARTRIDGE SMOKE 8-MIN/18000CU FT PK OF 1
Our Price: $29.51
Sale Price: $23.88
Savings: $5.63
Our Price: $63.01
Sale Price: $49.21
Savings: $13.80
Our Price: $122.70
Sale Price: $99.33
Savings: $23.37
PART #: S1-14250 PART #: S1-14340 PART #: S1-14460
PART #: 1500B2 - TAPE DUCT CLOTH 2"X60YD 11MIL BLACK (M24) PART #: 1500S2 - TAPE DUCT CLOTH 2"X60YD 11MIL GRY (M24) PART #: 1507 - TAPE LINESET 2"X60YD 3MIL BLACK (M24)
List Price: $18.29
Our Price: $11.91
Savings: $6.38
List Price: $18.29
Our Price: $11.91
Savings: $6.38
List Price: $16.93
Our Price: $11.03
Sale Price: $7.11
Savings: $9.82
PART #: S1-1500B2 PART #: S1-1500S2 PART #: S1-1507
PART #: 1520CW2 - TAPE DUCT FOIL 2"X50YD 2 MIL (M24) PART #: 1520CW25 - TAPE DUCT FOIL 2.5"X50YD 2 MIL (M20) PART #: 1520CW3 - TAPE DUCT FOIL 3"X50YD 2 MIL (M16)
List Price: $20.25
Our Price: $13.19
Sale Price: $9.07
Savings: $11.18
List Price: $25.25
Our Price: $16.44
Savings: $8.81
List Price: $33.46
Our Price: $21.79
Savings: $11.67
PART #: S1-1520CW2 PART #: S1-1520CW25 PART #: S1-1520CW3
PART #: 1525CW2 - TAPE DUCT FSK 2"X50YD 8 MIL (M24) PART #: 1525CW3 - TAPE DUCT FSK 3"X50YD 8 MIL (M16) PART #: 1581A25 - TAPE DUCT FOIL 2.5"X60YD 2.4 MIL (M20)
List Price: $20.25
Our Price: $13.19
Savings: $7.06
List Price: $33.43
Our Price: $21.77
Savings: $11.66
List Price: $37.29
Our Price: $24.28
Savings: $13.01
PART #: S1-1525CW2 PART #: S1-1525CW3 PART #: S1-1581A25
PART #: 1581A3 - TAPE DUCT FOIL 3"X60YD 2.4 MIL (M16) PART #: 1599B2 - TAPE DUCT FLEX 2"X120YD 3 MIL BLACK (M24) PART #: 1599B3 - TAPE DUCT FLEX 3"X120YD 3 MIL BLACK (M16)
List Price: $42.86
Our Price: $27.90
Sale Price: $16.56
Savings: $26.30
List Price: $26.46
Our Price: $17.23
Savings: $9.23
List Price: $39.68
Our Price: $25.83
Savings: $13.85
PART #: S1-1581A3 PART #: S1-1599B2 PART #: S1-1599B3
PART #: 1599S2 - TAPE DUCT FLEX 2"X120YD 3 MIL SLV (M24) PART #: 1599S3 - TAPE DUCT FLEX 3"X120YD 3 MIL SLV(M16) PART #: 2600 - OIL VACUUM PUMP 32-OZ (M12)
List Price: $26.46
Our Price: $17.23
Savings: $9.23
List Price: $39.68
Our Price: $25.83
Savings: $13.85
List Price: $16.46
Our Price: $10.72
Savings: $5.74
PART #: S1-1599S2 PART #: S1-1599S3 PART #: S1-2600
PART #: 2601 - OIL VACUUM PUMP 1-GAL (M6) PART #: 304079 - TAPE FOIL AFT-701 3"X50' (M16) PART #: 304093 - TAPE FOIL AFG-1402 2"X100' (M24)
List Price: $41.54
Our Price: $27.04
Savings: $14.50
Our Price: $31.40
Sale Price: $20.93
Savings: $10.47
Our Price: $25.74
PART #: S1-2601 PART #: S1-304079 PART #: S1-304093
PART #: 304099 - SEALANT FOIL TAPE 2 INCH 1402 (M24) PART #: 304100 - SEALANT FOIL TAPE 3 INCH 1402 (M16) PART #: 304146 - SEALANT DUCT CCW-181 11-OZ (M25)
Our Price: $28.68
Sale Price: $18.84
Savings: $9.84
Our Price: $43.01
Sale Price: $27.48
Savings: $15.53
List Price: $4.71
Our Price: $2.75
Sale Price: $2.22
Savings: $2.49
PART #: S1-304099 PART #: S1-304100 PART #: S1-304146
PART #: 304159 - SEALANT DUCT DS-321 11-OZ (M25) PART #: 304293 - ADHSV INSUL GLAS GRIP 658-12 LB PART #: 305095 Replace by S1-309781 - SEALANT TAPE 2 INCH 1403-181-BFX (M24)
List Price: $4.50
Our Price: $2.65
Sale Price: $2.14
Savings: $2.36
List Price: $244.25
Our Price: $143.62
Sale Price: $116.26
Savings: $127.99
List Price: $47.57
Our Price: $25.85
Sale Price: $18.63
Savings: $28.94
PART #: S1-304159 PART #: S1-304293 PART #: S1-305095
PART #: 30756 - PRIMER PVC PURPLE 8-OZ CAN (M24) PART #: 30780 - PRIMER PURPLE F/PVC 4-OZ CAN (M24) PART #: 30782 - CLEANER ALL-PURPOSE 8-OZ CAN (M24)
List Price: $9.36
Our Price: $6.09
Savings: $3.27
List Price: $4.50
Our Price: $2.93
Savings: $1.57
List Price: $7.50
Our Price: $4.88
Savings: $2.62
PART #: S1-30756 PART #: S1-30780 PART #: S1-30782
PART #: 30783 - PRIMER PURPLE F/PVC 8-OZ CAN (M24) PART #: 30795 - CLEANER ALL-PURPOSE 16-OZ CAN (M24) PART #: 30796 - PRIMER PURPLE F/PVC 16-OZ CAN (M24)
List Price: $8.25
Our Price: $5.38
Savings: $2.87
List Price: $11.04
Our Price: $7.18
Savings: $3.86
List Price: $11.89
Our Price: $5.59
Savings: $6.30
PART #: S1-30783 PART #: S1-30795 PART #: S1-30796
PART #: 30805 - CLEANER ALL-PURPOSE 32-OZ CAN (M12) PART #: 30818 - CEMENT ALL-PURPOSE CLEAR 4-OZ CAN (M24) PART #: 30821 - CEMENT ALL-PURPOSE CLEAR 8-OZ CAN (M24)
List Price: $19.25
Our Price: $12.54
Savings: $6.71
List Price: $6.25
Our Price: $4.07
Savings: $2.18
List Price: $11.82
Our Price: $7.70
Savings: $4.12
PART #: S1-30805 PART #: S1-30818 PART #: S1-30821
PART #: 30834 - CEMENT ALL-PURPOSE CLEAR 16-OZ CAN (M24) PART #: 308574 - ADHSV INSUL ROTO-TACK 5-GL PART #: 308592 - ADHSV INSTA-TACK RED 5 GAL PAIL
List Price: $24.14
Our Price: $15.72
Savings: $8.42
List Price: $232.68
Our Price: $151.47
Savings: $81.21
Our Price: $119.45
PART #: S1-30834 PART #: S1-308574 PART #: S1-308592
PART #: 308599 - ADHESIVE INSUL TRAVEL-TACK 12-OZ (M12) PART #: 308605 - ADHESIVE DUCTLINER TRAVEL-TACK 40-LB PART #: 30891 - CEMENT PVC BLUE 8-OZ CAN (M24) Rain-R-Shine
List Price: $23.50
Our Price: $13.82
Sale Price: $11.18
Savings: $12.32
Our Price: $267.74
List Price: $11.93
Our Price: $7.77
Savings: $4.16
PART #: S1-308599 PART #: S1-308605 PART #: S1-30891
PART #: 30893 - CEMENT,PVC,BLUE,16-OZ CAN (M24) PART #: 309781 - SEALANT TAPE 2 INCH 1403-181-BFX (M24) PART #: 31012 - CEMENT PVC REGULAR 4-OZ CAN (M24)
List Price: $21.25
Our Price: $13.82
Savings: $7.43
List Price: $51.32
Our Price: $30.16
Sale Price: $21.36
Savings: $29.96
List Price: $6.14
Our Price: $4.00
Savings: $2.14
PART #: S1-30893 PART #: S1-309781 PART #: S1-31012
PART #: 31013 - CEMENT PVC REGULAR 8-OZ CAN (M24) PART #: 31014 - CEMENT PVC REGULAR 16-OZ CAN (M24) PART #: 31015 - CEMENT PVC REGULAR 32-OZ CAN (M12)
List Price: $9.21
Our Price: $5.69
Sale Price: $4.60
Savings: $4.61
List Price: $13.18
Our Price: $8.58
Savings: $4.60
List Price: $21.36
Our Price: $13.90
Savings: $7.46
PART #: S1-31013 PART #: S1-31014 PART #: S1-31015
PART #: 31129 - CEMENT,CPVC,ORANGE,LOW VOC,8-OZ (M24) PART #: 31132 - CEMENT PVC ALL-WEATHER 16-OZ CAN (M24) PART #: 31227 - COMPOUND PIPE JOINT W/BRUSH 4 OZ (M12)
List Price: $14.46
Our Price: $9.41
Savings: $5.05
List Price: $13.68
Our Price: $8.90
Savings: $4.78
List Price: $7.64
Our Price: $4.98
Savings: $2.66
PART #: S1-31129 PART #: S1-31132 PART #: S1-31227
PART #: 31228 - COMPOUND PIPE JOINT W/BRUSH 8 OZ (M12) PART #: 31230 - COMPOUND PIPE JOINT W/TEFLON 4 OZ (M12) PART #: 31231 - COMPOUND PIPE JOINT W/TEFLON 8 OZ (M12)
List Price: $13.96
Our Price: $9.09
Savings: $4.87
List Price: $14.61
Our Price: $9.51
Sale Price: $6.95
Savings: $7.66
List Price: $25.96
Our Price: $16.91
Savings: $9.05
PART #: S1-31228 PART #: S1-31230 PART #: S1-31231
PART #: 315-20 - ADHESIVE SPRAY 12-OZ AEROSOL (M12) PART #: 405106 - MOISTURE REMOVER A/C EASY DRY (M6) PART #: 405750 - A/C RE-NEW PRESSUREURIZED CAN (M6)
List Price: $12.07
Our Price: $7.85
Savings: $4.22
List Price: $125.79
Our Price: $81.89
Savings: $43.90
List Price: $175.14
Our Price: $114.02
Savings: $61.12
PART #: S1-315-20 PART #: S1-405106 PART #: S1-405750
PART #: 405752 - A/C RE-NEW DISPLAY PACK PART #: 405755 - A/C RE-NEW UNPRESSUREURIZED 4-OZ (M6) PART #: 408004 - ADHESIVE AEROSOL 11 OZ (M6)
List Price: $404.07
Our Price: $263.05
Savings: $141.02
List Price: $134.36
Our Price: $87.47
Savings: $46.89
List Price: $35.64
Our Price: $23.21
Savings: $12.43
PART #: S1-405752 PART #: S1-405755 PART #: S1-408004
PART #: 408203 - CLEANER ELECTRICAL CONTACT 11 OZ (M6) PART #: 408375 - SOLVENT EF DEGREASING 17 OZ AEROSOL (M6) PART #: 408403 - SILICONE FOOD GRADE 11.75 OZ AEROSOL(M6)
List Price: $43.25
Our Price: $28.16
Savings: $15.09
List Price: $24.64
Our Price: $16.04
Savings: $8.60
List Price: $32.89
Our Price: $21.41
Savings: $11.48
PART #: S1-408203 PART #: S1-408375 PART #: S1-408403
PART #: 408603 - DRESSING V-BELT 11 OZ AEROSOL CAN (M6) PART #: 408703 - GALVANIZING COLD ZINC RICH 16 OZ (M6) PART #: 412803 - LUBRICANT BREAK-N-LUBE 12 OZ AEROSOL(M6)
List Price: $36.29
Our Price: $23.63
Savings: $12.66
List Price: $34.18
Our Price: $22.25
Savings: $11.93
List Price: $16.75
Our Price: $10.91
Savings: $5.84
PART #: S1-408603 PART #: S1-408703 PART #: S1-412803
PART #: 413408 - SCALE REMOVER CALCI-SOLVE 1-GL (M4) PART #: 414306 - CALCLEAN SPECIAL HD 2.5 GALLON JUG (M1) PART #: 414308 - CALCLEAN SPECIAL HD 1 GALLON BOTTLE (M4)
Our Price: $36.02
Our Price: $99.41
Our Price: $39.60
PART #: S1-413408 PART #: S1-414306 PART #: S1-414308
PART #: 417175 - EVAPORATOR FOAM-NO RINSE 18 OZ AEROSOL CAN(M6) PART #: 417304 - EVAPORATOR-TREAT UP TO 6 500 CFM 1CANISTER(M6) PART #: 417306 - EVAPORATOR-TREAT UP TO 10 000CFM 1CANISTER(M6)
Our Price: $13.30
Sale Price: $10.28
Savings: $3.02
List Price: $38.50
Our Price: $25.06
Savings: $13.44
List Price: $45.18
Our Price: $29.41
Savings: $15.77
PART #: S1-417175 PART #: S1-417304 PART #: S1-417306
PART #: 418053 - DETECTOR GAS LEAK 6OZBOTTLEW/DAUBER(M24) PART #: 418408 - DETECTOR GAS LEAK FLUORESCENT 1 GAL (M4) PART #: 418424 - DETECTOR GAS LEAK FLUORESCENT 1 QT (M12)
List Price: $15.39
Our Price: $10.02
Savings: $5.37
List Price: $55.14
Our Price: $35.90
Savings: $19.24
List Price: $27.32
Our Price: $17.79
Savings: $9.53
PART #: S1-418053 PART #: S1-418408 PART #: S1-418424
PART #: 418608 - GREEN CLEAN 1 GALLON BOTTLE (M4) PART #: 418624 - GREEN CLEAN 1 QUART SPRAY BOTTLE (M12) PART #: 418801 - FREEZ-KONTR'L GLYCOL 55 GALLON DRUM (M1)
List Price: $46.57
Our Price: $30.31
Savings: $16.26
List Price: $25.36
Our Price: $16.51
Savings: $8.85
List Price: $2,573.71
Our Price: $1,675.49
Savings: $898.22
PART #: S1-418608 PART #: S1-418624 PART #: S1-418801
PART #: 418805 - FREEZ-KONTR'L GLYCOL 5 GALLON PAIL (M1) PART #: 418807 - FREEZ-KONTR'L GLYCOL 1 GALLON JUG (M6) PART #: 418901 - FREEZ-THERM GLYCOL 55 GALLON DRUM (M1)
List Price: $237.11
Our Price: $154.36
Savings: $82.75
List Price: $48.82
Our Price: $31.78
Savings: $17.04
List Price: $2,433.68
Our Price: $1,584.32
Savings: $849.36
PART #: S1-418805 PART #: S1-418807 PART #: S1-418901
PART #: 418905 - FREEZ-THERM GLYCOL 5 GALLON PAIL (M1) PART #: 418907 - FREEZ-THERM GLYCOL 1 GALLON JUG (M6) PART #: 421134 - SANITIZER IMS-II CONCENTRATE 16 OZ (M12)
List Price: $238.00
Our Price: $154.94
Savings: $83.06
List Price: $49.00
Our Price: $31.90
Savings: $17.10
Our Price: $15.73
Sale Price: $12.73
Savings: $3.00
PART #: S1-418905 PART #: S1-418907 PART #: S1-421134
PART #: 421627 - INSULATION SEALING CORD3/8"X25'ROLL(M12) PART #: 421692 - INSULATION SEALING SLUGS 2 LB BOX (M24) PART #: 4217W3 - INSULATION CORK TAPE 2" X 1/8"X30' (M12)
List Price: $26.75
Our Price: $17.42
Savings: $9.33
List Price: $23.25
Our Price: $15.14
Savings: $8.11
List Price: $35.36
Our Price: $23.02
Savings: $12.34
PART #: S1-421627 PART #: S1-421692 PART #: S1-4217W3
PART #: 4218W3 - INSULATION FOAMTAPE 2 X 1/8" X 30' (M12) PART #: 421912 - INSULATION FOAMTAPE 2X1/8"X30'ROLL (M12) PART #: 429075 - NU-BLAST CONDENSER COIL CLEANER 18 OZ (M6)
List Price: $32.46
Our Price: $21.14
Savings: $11.32
List Price: $21.29
Our Price: $13.86
Savings: $7.43
List Price: $29.32
Our Price: $19.09
Savings: $10.23
PART #: S1-4218W3 PART #: S1-421912 PART #: S1-429075
PART #: 429275 - NU-KILL II WASP&HORNET KILLER 13.5OZ(M6) PART #: 429304 - SEALANT EXPANDING NU-FOAM 9 OZ (M12) PART #: 429375 - SEALANT EXPANDING NU-FOAM 20 OZ (M12)
List Price: $25.64
Our Price: $16.70
Savings: $8.94
List Price: $17.89
Our Price: $11.64
Savings: $6.25
List Price: $34.00
Our Price: $22.13
Savings: $11.87
PART #: S1-429275 PART #: S1-429304 PART #: S1-429375
PART #: 429534 - PAN PADS-5 TON 3/4 OZ (M24) PART #: 429536 - PAN PADS-5 TON SLIM 3/4 OZ (M24) PART #: 429624 - PAN PADS-15 TON 2-1/8 OZ (M12)
List Price: $12.04
Our Price: $7.83
Savings: $4.21
List Price: $12.04
Our Price: $7.83
Savings: $4.21
List Price: $30.21
Our Price: $19.67
Savings: $10.54
PART #: S1-429534 PART #: S1-429536 PART #: S1-429624
PART #: 429645 - PAN PADS-45 TON 6 OZ (M6) PART #: 429650 - SEALER PAN-SPRAY WHITE 16 OZ AEROSOL(M6) PART #: 429651 - SEALER PAN-SPRAY BLACK 16 OZ AEROSOL(M6)
List Price: $66.18
Our Price: $43.08
Savings: $23.10
List Price: $41.50
Our Price: $27.02
Savings: $14.48
List Price: $41.50
Our Price: $27.02
Savings: $14.48
PART #: S1-429645 PART #: S1-429650 PART #: S1-429651
PART #: 429660 - PAN-TREAT 200 TABLET JAR (M12) PART #: 429910 - TAPE PIPE REPAIR QUICK-SEAL 2" X 3' (M6) PART #: 429911 - TAPE PIPE REPAIR QUICK-SEAL 4" X12' (M1)
List Price: $49.14
Our Price: $31.99
Savings: $17.15
List Price: $79.00
Our Price: $51.43
Savings: $27.57
List Price: $238.71
Our Price: $155.40
Savings: $83.31
PART #: S1-429660 PART #: S1-429910 PART #: S1-429911
PART #: 430102 - RX-ACID SCAVENGER ALL OILS (M6) PART #: 430805 - OIL REFRIGERANTERATION ZEROL 200TD 5 GAL (M1) PART #: 430807 - OIL REFRIGERANTERATION ZEROL 200TD 1 GAL (M6)
List Price: $52.93
Our Price: $34.46
Savings: $18.47
List Price: $613.29
Our Price: $399.25
Savings: $214.04
List Price: $118.04
Our Price: $76.84
Savings: $41.20
PART #: S1-430102 PART #: S1-430805 PART #: S1-430807
PART #: 431007 - OIL REFRIGERANTERATION ZEROL 150 1GALLON (M6) PART #: 431107 - OIL REFRIGERANTERATION ZEROL 300 1GALLON (M6) PART #: 431250 - ZEROL ICE INDIVIDUAL CAN (M6)
List Price: $114.18
Our Price: $74.33
Savings: $39.85
List Price: $148.07
Our Price: $96.39
Savings: $51.68
List Price: $154.86
Our Price: $100.81
Savings: $54.05
PART #: S1-431007 PART #: S1-431107 PART #: S1-431250
PART #: 431254 - ZEROL ICE BULK 1 QUART (M2) PART #: 431256 - ZEROL ICE BULK 1 GALLON (M1) PART #: 431446 - LUBRICANT EMKARATE RL 32H 1 GAL(M4) 4314-46
List Price: $574.50
Our Price: $374.00
Savings: $200.50
List Price: $1,849.40
Our Price: $1,203.96
Savings: $645.44
List Price: $208.25
Our Price: $135.58
Sale Price: $81.63
Savings: $126.62
PART #: S1-431254 PART #: S1-431256 PART #: S1-431446
PART #: 4320W8 - TEST KIT REFRIGERANT OIL ALL PHASE III (M24) PART #: 434005 - SCALE INHIBITOR 340 LIQUID 5 GAL JUG (M1) PART #: 434008 - SCALE INHIBITOR 340 LIQUID 1 GALLON (M4)
List Price: $30.18
Our Price: $19.65
Savings: $10.53
Our Price: $585.19
Sale Price: $378.67
Savings: $206.52
List Price: $175.82
Our Price: $114.46
Savings: $61.36
PART #: S1-4320W8 PART #: S1-434005 PART #: S1-434008
PART #: 436975 - ADHESIVE SPRAY-N-BOND 12 OZ AEROSOL (M6) PART #: 437136 - THERMO-TRAP 11 OZ TUBE (M12) PART #: 438307 - OIL VACUUM PUMP 1 GALLON JUG (M6)
List Price: $13.89
Our Price: $9.04
Savings: $4.85
List Price: $25.11
Our Price: $16.35
Savings: $8.76
List Price: $68.50
Our Price: $44.59
Savings: $23.91
PART #: S1-436975 PART #: S1-437136 PART #: S1-438307
PART #: 438324 - OIL VACUUM PUMP 1 QUART BOTTLE (M12) PART #: 438334 - OIL VACUUM PUMP 1 PINT BOTTLE (M24) PART #: 439008 - WINTER TREAT 1 GALLON JUG (M4)
List Price: $25.11
Our Price: $16.35
Savings: $8.76
List Price: $16.00
Our Price: $10.42
Savings: $5.58
List Price: $67.46
Our Price: $43.92
Savings: $23.54
PART #: S1-438324 PART #: S1-438334 PART #: S1-439008
PART #: 439032 - WINTER TREAT 1 QUART (M12) PART #: 46030 - ACID PUMP SUBMERSIBLE 31-TX (M1) PART #: 46040 - HOSE KIT ACID PUMP HK-31 (M1)
List Price: $21.82
Our Price: $14.21
Savings: $7.61
List Price: $387.68
Our Price: $252.38
Savings: $135.30
List Price: $116.04
Our Price: $75.54
Savings: $40.50
PART #: S1-439032 PART #: S1-46030 PART #: S1-46040
PART #: 46084 - MONITOR SYSTEM CMS-IV COOLING TOWER(M1) PART #: 46091 - PUMP FEED CMS-V (M1) PART #: 4612W3 - FILTER MICRO-PLUS 4 - 25 GAL/DAY H2O(M6)
List Price: $2,856.47
Our Price: $1,859.56
Savings: $996.91
List Price: $1,134.01
Our Price: $738.24
Savings: $395.77
List Price: $103.21
Our Price: $67.19
Savings: $36.02
PART #: S1-46084 PART #: S1-46091 PART #: S1-4612W3
PART #: 4613Y8 - FILTER MICRO-PLUS 8 - 50 GAL/DAY H2O(M6) PART #: 4614Y8 - FILTER MICRO-PLUS 16-100 GAL/DAY H2O(M6) PART #: 4615W3 - FILTER MICRO-PLUS 2-12.5 GAL/DAY H2O(M6)
List Price: $150.50
Our Price: $97.98
Savings: $52.52
List Price: $196.43
Our Price: $127.88
Savings: $68.55
List Price: $58.25
Our Price: $37.93
Savings: $20.32
PART #: S1-4613Y8 PART #: S1-4614Y8 PART #: S1-4615W3
PART #: 46280 - FEEDER MICROMET NO. 20L (M1) PART #: 46500 - FEEDER MICROMET NO. 100L (M1) PART #: 4669W3 - FEEDER DRIP NO. 215 (M6)
List Price: $714.79
Our Price: $465.33
Savings: $249.46
List Price: $1,385.71
Our Price: $902.10
Savings: $483.61
List Price: $83.04
Our Price: $54.05
Savings: $28.99
PART #: S1-46280 PART #: S1-46500 PART #: S1-4669W3
PART #: 4670W3 - FEEDER DRIP NO. 1075 (M6) PART #: 46930 - FOGGER BIO-FRESH CD (M1) PART #: 51301503000 - PAINT TOUCH UP TITANIUM
List Price: $86.51
Our Price: $56.32
Savings: $30.19
List Price: $1,237.71
Our Price: $805.75
Savings: $431.96
List Price: $57.31
Our Price: $37.31
Savings: $20.00
PART #: S1-4670W3 PART #: S1-46930 PART #: S1-51301503000
PART #: 51301505000 - PAINT NON-METALLIC CHAMPAGNE PART #: 51301530000 - PAINT TOUCH-UP CHAMPAGNE 2 16 OZ AEROSOL PART #: 51301531000 - PAINT TOUCH-UP TITANIUM 2 16 OZ AEROSOL
List Price: $26.07
Our Price: $16.97
Savings: $9.10
List Price: $32.13
Our Price: $20.92
Savings: $11.21
List Price: $32.13
Our Price: $20.92
Savings: $11.21
PART #: S1-51301505000 PART #: S1-51301530000 PART #: S1-51301531000
PART #: 51301532000 - PAINT TOUCH-UP TITANIUM NON-METALLIC PART #: 51301535000 - PAINT CHAMPAGNE GLOSSY 12 OZ AEROSOL PART #: 51302594000 - PAINT SIERRA BROWN-HIGH GLOSS
List Price: $95.43
Our Price: $62.13
Savings: $33.30
Our Price: $44.92
List Price: $30.14
Our Price: $19.62
Savings: $10.52
PART #: S1-51301532000 PART #: S1-51301535000 PART #: S1-51302594000
PART #: 51302881700 - PAINT DESERT SAND (TAN) PART #: 51302934000 - PAINT METALLIC CHAMPAGNE PART #: 51303082000 - GREEN FIN AEROSOL KIT (M4)
List Price: $38.48
Our Price: $25.05
Savings: $13.43
List Price: $35.42
Our Price: $23.06
Savings: $12.36
List Price: $174.71
Our Price: $113.74
Savings: $60.97
PART #: S1-51302881700 PART #: S1-51302934000 PART #: S1-51303082000
PART #: 540-799 - MARKER VALVE ACT REG TIP RED (M12) PART #: 540-800 - MARKER VALVE ACT REG TIP BLACK (M12) PART #: 540-805 - MARKER PAINT VALVE ACT BLACK (M12)
List Price: $4.96
Our Price: $3.23
Savings: $1.73
List Price: $4.96
Our Price: $3.23
Savings: $1.73
List Price: $7.54
Our Price: $4.90
Savings: $2.64
PART #: S1-540-799 PART #: S1-540-800 PART #: S1-540-805
PART #: 540-806 - MARKER PAINT VALVE ACT RED (M12) PART #: 540-807 - MARKER PAINT VALVE ACT WHT (M12) PART #: 540-808 - MARKER PAINT VALVE ACT YLW (M12)
List Price: $7.54
Our Price: $4.90
Savings: $2.64
List Price: $7.54
Our Price: $4.90
Savings: $2.64
List Price: $7.54
Our Price: $4.90
Savings: $2.64
PART #: S1-540-806 PART #: S1-540-807 PART #: S1-540-808
PART #: 7-80632 - SEALANT THREAD 1/4-PINT BRUSH CAN (M12) PART #: 7-80633 - SEALANT THREAD 1-PINT BRUSH CAN (M12) PART #: 741-001 - LUBRICANT WD-40 8-OZ (M12)
List Price: $15.36
Our Price: $10.00
Savings: $5.36
List Price: $36.36
Our Price: $23.67
Savings: $12.69
List Price: $14.71
Our Price: $9.58
Savings: $5.13
PART #: S1-7-80632 PART #: S1-7-80633 PART #: S1-741-001
PART #: 741-002 - LUBRICANT WD-40 11-OZ (M12) PART #: 759705 - TY-ION C70 5 GALLON PAIL (M1) PART #: 7597P3 - TY-ION C70 15 GALLON PAIL (M1)
List Price: $18.07
Our Price: $11.76
Savings: $6.31
Our Price: $429.08
List Price: $1,946.99
Our Price: $1,267.49
Savings: $679.50
PART #: S1-741-002 PART #: S1-759705 PART #: S1-7597P3
PART #: 770-15 - INSULATION PIPE SPRAY 15-OZ AEROSOL(M12) PART #: 799-001 - PAINT SPRAY 2870N GLOSS BLACK (M6) PART #: 799-002 - PAINT SPRAY 2871N FLAT BLACK (M6)
List Price: $20.07
Our Price: $13.06
Savings: $7.01
List Price: $8.36
Our Price: $5.44
Savings: $2.92
List Price: $8.36
Our Price: $5.44
Savings: $2.92
PART #: S1-770-15 PART #: S1-799-001 PART #: S1-799-002
PART #: 799-003 - PAINT SPRAY 2872N APPLIANCE WHITE (M6) PART #: 799-004 - PAINT SPRAY 2873N FLAT WHITE (M6) PART #: 799-005 - PAINT SPRAY 2881N MACHINE GRAY (M6)
List Price: $8.36
Our Price: $5.44
Savings: $2.92
List Price: $8.36
Our Price: $5.44
Savings: $2.92
List Price: $8.36
Our Price: $5.44
Savings: $2.92
PART #: S1-799-003 PART #: S1-799-004 PART #: S1-799-005
PART #: 799-006 - PAINT SPRAY 2868N GRAY PRIMER (M6) PART #: 799-007 - PAINT SPRAY 2867N RED PRIMER (M6) PART #: 799-008 - PAINT SPRAY BRIGHT 2875N YELLOW (M6)
List Price: $8.36
Our Price: $5.44
Savings: $2.92
List Price: $8.39
Our Price: $5.46
Savings: $2.93
List Price: $8.39
Our Price: $5.46
Savings: $2.93
PART #: S1-799-006 PART #: S1-799-007 PART #: S1-799-008
PART #: 799-009 - PAINT SPRAY 2876N SAFETY BLUE (M6) PART #: 799-010 - PAINT SPRAY 2878N ORANGE (M6) PART #: 799-011 - PAINT SPRAY 2880N ALUMINUM (M6)
List Price: $8.36
Our Price: $5.44
Savings: $2.92
List Price: $8.36
Our Price: $5.44
Savings: $2.92
List Price: $8.36
Our Price: $5.44
Savings: $2.92
PART #: S1-799-009 PART #: S1-799-010 PART #: S1-799-011
PART #: 799-012 - COLD GALVANIZING SPRAY (M6) PART #: 799-013 - PAINT SPRAY 2874N BRIGHT RED (M6) PART #: 799-021 - PAINT SPRAY 2355N FLAT BLACK (M6)
List Price: $21.43
Our Price: $13.95
Savings: $7.48
List Price: $8.36
Our Price: $5.44
Savings: $2.92
List Price: $14.25
Our Price: $9.28
Savings: $4.97
PART #: S1-799-012 PART #: S1-799-013 PART #: S1-799-021
PART #: 799-022 - PAINT SPRAY 2356N GLOSS WHITE (M6) PART #: 799-023 - PAINT SPRAY2359N MACH DARK GRAY (M6) PART #: 799-024 - PAINT SPRAY MACH. LIGHT GRAY (M6)
List Price: $15.39
Our Price: $10.02
Savings: $5.37
List Price: $14.25
Our Price: $9.28
Savings: $4.97
List Price: $14.25
Our Price: $9.28
Savings: $4.97
PART #: S1-799-022 PART #: S1-799-023 PART #: S1-799-024
PART #: 799-025 - PAINT SPRAY 2382N ALUMINUM (M6) PART #: 799-026 - PAINT SPRAY 2389N OSHA RED (M6) PART #: 799-031 - PAINT SPRAY 2750N GRAY PRIMER (M6)
List Price: $14.25
Our Price: $9.28
Savings: $4.97
List Price: $14.54
Our Price: $9.46
Savings: $5.08
List Price: $12.71
Our Price: $8.27
Savings: $4.44
PART #: S1-799-025 PART #: S1-799-026 PART #: S1-799-031
PART #: 799-032 - PAINT SPRAY 2753N GLOSS BLACK (M6) PART #: 799-035 - PAINT SPRAY 2756N GLOSS WHITE (M6) PART #: 799-040 - SPRAY PAINT ALUMINUM (M6)
List Price: $12.68
Our Price: $8.25
Savings: $4.43
List Price: $12.04
Our Price: $7.83
Savings: $4.21
List Price: $20.14
Our Price: $13.11
Savings: $7.03
PART #: S1-799-032 PART #: S1-799-035 PART #: S1-799-040
PART #: 799-041 - SPRAY PAINT BLACK (M6) PART #: BOSS12501 - SEALANT MULTI-SEAL WHT 10.5-OZ (M12) PART #: BOSS12502 - SEALANT MULTI-SEAL BLACK 10.5-OZ (M12)
List Price: $20.14
Our Price: $13.11
Savings: $7.03
List Price: $14.32
Our Price: $8.40
Sale Price: $6.80
Savings: $7.52
List Price: $14.32
Our Price: $8.40
Sale Price: $6.80
Savings: $7.52
PART #: S1-799-041 PART #: S1-BOSS12501 PART #: S1-BOSS12502
PART #: BOSS12503 - SEALANT MULTI-SEAL GRY 10.5-OZ (M12) PART #: BOSS13605 - SEALANT FIREBLOCK/DRAFTSTOP 10.5-OZ(M12) PART #: BOSS36802 - SEALANT BUTYL BLACK 10.5-OZ CARTR (M12)
List Price: $14.32
Our Price: $8.40
Sale Price: $6.80
Savings: $7.52
List Price: $13.89
Our Price: $8.15
Sale Price: $6.59
Savings: $7.30
List Price: $10.57
Our Price: $6.88
Savings: $3.69
PART #: S1-BOSS12503 PART #: S1-BOSS13605 PART #: S1-BOSS36802
PART #: BOSS81610 - SEALANT FIRESTOP INTUMESCENT 10.5-OZ(M12 PART #: CAS-2712 - SEALANT ADHESIVE 0.34-OZ (M10) PART #: CR-1 - RUST BREAKER 4-OZ (M12)
List Price: $19.25
Our Price: $12.54
Savings: $6.71
List Price: $18.86
Our Price: $12.27
Savings: $6.59
Our Price: $3.32
PART #: S1-BOSS81610 PART #: S1-CAS-2712 PART #: S1-CR-1
PART #: CRC-7PS - SOLVENT DEGR PRESSUREOLVE 15-OZ (M12) PART #: CRC-7Z - SOLVENT DEGR ZEROTRI 15-OZ (M12) PART #: CRC-9 - LUBRICANT WHITE LITHIUM 10-OZ (M12)
Our Price: $23.15
Sale Price: $16.96
Savings: $6.19
Our Price: $30.18
Sale Price: $22.11
Savings: $8.07
Our Price: $15.79
Sale Price: $11.53
Savings: $4.26
PART #: S1-CRC-7PS PART #: S1-CRC-7Z PART #: S1-CRC-9
PART #: CS-100 - STA-CLEAN PAN STRIPS 2.5 TON (M12) PART #: CS-50 - STA-CLEAN PAN STRIPS (M12) PART #: DEP052 - GLUE SUPER 2-GRAM TUBE (M12)
List Price: $15.64
Our Price: $10.19
Savings: $5.45
List Price: $9.25
Our Price: $6.03
Savings: $3.22
List Price: $4.86
Our Price: $3.16
Savings: $1.70
PART #: S1-CS-100 PART #: S1-CS-50 PART #: S1-DEP052
PART #: E-10032 - SYNTHETIC LUBRICANT 32 OUNCE E100 (M12) PART #: E-6801 - SYNTHETIC LUBRICANT 1 GALLON E68 (M6) PART #: E-6832 - SYNTHETIC LUBRICANT 32 OUNCE E68 (M12)
List Price: $60.89
Our Price: $39.64
Savings: $21.25
List Price: $186.96
Our Price: $121.72
Savings: $65.24
List Price: $57.93
Our Price: $37.72
Savings: $20.21
PART #: S1-E-10032 PART #: S1-E-6801 PART #: S1-E-6832
PART #: ET33 - TAPE ELEC SUPER 33+ 3/4"X66' (M10) PART #: ET35G - TAPE ELEC VINYL GREEN 3/4"X66' (M10) PART #: ET35N - TAPE ELEC VINYL ORANGE 3/4"X66' (M10)
List Price: $15.43
Our Price: $8.93
Savings: $6.50
List Price: $14.43
Our Price: $9.40
Savings: $5.03
List Price: $14.43
Our Price: $9.40
Savings: $5.03
PART #: S1-ET33 PART #: S1-ET35G PART #: S1-ET35N
PART #: ET35R - TAPE ELEC VINYL RED 3/4"X66' (M10) PART #: ET35W - TAPE ELEC VINYL WHITE 3/4"X66' (M10) PART #: ET44 - TAPE ELEC SUPER 88 3/4"X66' (M10)
List Price: $14.43
Our Price: $9.40
Savings: $5.03
List Price: $14.43
Our Price: $9.40
Savings: $5.03
List Price: $19.32
Our Price: $12.58
Savings: $6.74
PART #: S1-ET35R PART #: S1-ET35W PART #: S1-ET44
PART #: H-2700 - TAPE CORK 1/8 X 2 X 30 FOOT ROLL (M12) PART #: H-2800 - TAPE FOAM 1/8 X 2 X 30 FOOT ROLL (M12) PART #: H-2901 - CORD GUM 3/8 DIA X25'ROLL(M12)
List Price: $16.64
Our Price: $14.51
Sale Price: $10.36
Savings: $6.28
List Price: $16.61
Our Price: $10.02
Sale Price: $7.15
Savings: $9.46
List Price: $13.11
Our Price: $8.54
Savings: $4.57
PART #: S1-H-2700 PART #: S1-H-2800 PART #: S1-H-2901
PART #: H-2902 - GUM SLUG 2 POUND (M24) PART #: H-NT03 - ODOR NEUTRALIZER 3 POUND (M4) PART #: LS-1 - SEALANT REFRIGERANT CIRCUIT LINESEAL 1-OZ (M12)
List Price: $15.04
Our Price: $9.79
Savings: $5.25
Our Price: $23.02
List Price: $112.21
Our Price: $73.05
Sale Price: $42.00
Savings: $70.21
PART #: S1-H-2902 PART #: S1-H-NT03 PART #: S1-LS-1
PART #: P-22001 - SYNTHETIC LUBRICANT SW220 1 GALLON (M6) PART #: P-22032 - SYNTHETIC LUBRICANT SW220 32 OZ (M12) PART #: P-6801 - SYNTHETIC LUBRICANT SW68 1 GALLON (M6)
List Price: $191.04
Our Price: $124.36
Savings: $66.68
List Price: $59.14
Our Price: $38.50
Savings: $20.64
List Price: $164.21
Our Price: $106.90
Savings: $57.31
PART #: S1-P-22001 PART #: S1-P-22032 PART #: S1-P-6801
PART #: P-6832 - SYNTHETIC LUBRICANT SW68 32 OUNCE (M12) PART #: PF-KIT - FLUSH KIT SYSTEM PRO-FLUSH SOLVENT PART #: RTVCLR - SEALANT SILICONE RTV CLR 10.1OZ (M12)
List Price: $48.46
Our Price: $31.55
Savings: $16.91
List Price: $267.82
Our Price: $174.35
Savings: $93.47
List Price: $8.64
Our Price: $5.63
Savings: $3.01
PART #: S1-P-6832 PART #: S1-PF-KIT PART #: S1-RTVCLR
PART #: RTVGRY - SEALANT SILICONE RTV GRY 10.1OZ (M12) PART #: RTVRED - SEALANT HITEMP SILICONE RTV 10.1OZ (M12) PART #: RTVWHT - SEALANT SILICONE RTV WHT 10.1OZ (M12)
List Price: $8.64
Our Price: $5.63
Savings: $3.01
List Price: $13.18
Our Price: $8.58
Savings: $4.60
List Price: $8.64
Our Price: $5.63
Savings: $3.01
PART #: S1-RTVGRY PART #: S1-RTVRED PART #: S1-RTVWHT
PART #: SCM-831-32 - SPRAY DUCT FRESH 32-OZ (M12)
List Price: $20.43
Our Price: $13.30
Savings: $7.13
PART #: S1-SCM-831-32